Retroid Handhelds - User contributions [en]

Firmware

2020-12-07T15:16:01Z

172.58.207.166: /* Re-flashing Your RP2 with Android 6.0 */

__TOC__

=Retroid Official Over-the-Air (OTA) Method=

=== Update Repair App ===

In order to use the Retroid Upgrade app, you are required to have a working version of RetroidOS on an externally formatted SD card.
If you need to repair RetroidOS or reinstall it (if you're moving from internally formatted, or just deleted it) follow the procedure linked below.

While this will restore RetroidOS functionality for those that don't have it, the steps are still useful even for users who have RetroidOS intact as it will install the necessary Update.APK which is Retroid's OTA app.

[https://cdn.discordapp.com/attachments/753684190603509871/774740929763606549/Upgrade_Repair_apk_Installation_method.docx Click here for the procedure.] 
 
Please note Retroid does NOT update via Google's OTA facility.
 
 
Once the above is finished, you can run the Updater tool to immediately update to the newest version of Android currently available for the device.

Link to the Upgrade Repair APK file is available at https://bit.ly/2GEqyGz
 

=Manual Flashing Method=

== Android 8.1 ==

Below are the 8.1 Image Files. Follow this [https://youtu.be/6aXKeEpOu9Y video guide] for updating or follow the included instructions in the zip file.

 
8.1 OS Image (V3 Final):
https://drive.google.com/file/d/1-BGTmqqTOXrr5kxBKslpScLhmxbfPnvm/view?usp=drivesdk

 
8.1 SD Card image (V3 Final): https://drive.google.com/file/d/1NcGMacWnCxmpDq0vLbct6s_JvhzJl6sP/view?usp=sharing

 
Mega Mirror copy of the GDrive folder with instructions on flashing 6.0 and 8.1: https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA (Use if Gdrive links aren't working for you).

== RetroidOS ==

=== Downloading the RetroidOS Files ===

Here is a [https://drive.google.com/file/d/1Li1LR9Lc9-cMIFtM7UXWPB8oDDTPqtAi/view stock SD Card image (2.6GB ZIP)] for use with the RP2, in case your original card is damaged, formatted, or erased. This will restore your ability to use RetroidOS and the Retroid store, but no games are included.
 
 
 

== Advanced Actions ==

=== Downloading the Android Files ===

If you uninstalled any preinstalled apps and would like to reinstall the stock versions, here is [https://drive.google.com/drive/folders/14osfAwZURQEayHUyrSA5j7TdEV1dmxyP?usp=sharing a folder with all the APKs.]

A backup of the stock internal storage files (6.5MB) can be found [https://drive.google.com/file/d/1Viw4qTmEGxllbTkbz6NR5uUbA4Ge1yTk/view?usp=sharing here.] This is useful if you mess up the configs that come with the device.

[https://drive.google.com/drive/folders/1MAwGsJ-uz6jkxVPCvuMY9QUhMzJu2Cp0?usp=sharing Here] is a Google Drive folder with all the files contained on this wiki page. You can add it to your Google Drive and find it in the "Shared with me" section for easy future access.

=== Root Access (Android 6 Only) ===

[https://cdn.discordapp.com/attachments/753684190603509871/755114189999177808/rp2-root.zip Download this ZIP archive] and root your RP2 at your own risk. There is a guide available inside the zip called 'Installation.txt'.

You will also need ADB Drivers for windows. You can easily achieve this by using this program:

[https://drive.google.com/file/d/0B0MKgCbUM0itSUhpUklCTFpzWkE/view Download ADB Drivers]

=== Re-flashing Your RP2 with Android 6.0 ===

Here is our mega [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA download] for Android 6, re-flash guide and files within. This will NOT restore your RetroidOS files (see above).

Tip: If you are having any issues with connecting your device to your PC or if you are trying to re-flash the device, make sure to install the [https://www.ytechb.com/mt65xx-preloader-driver/ MT Drivers]. It will include the drivers for USB support. If you have previous drivers please make sure to uninstall them.

Notes before we get started: Here is the [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA source folder] with all the files you'll need to re-flash your Retroid.

Tip: If for whatever reason you have changed default usb drivers on your PC, you will reach a point in this process where you hit download and connect your device, but nothing happens. The fix is to download [https://www.ytechb.com/mt65xx-preloader-driver/ MR Drivers] and install it, then run it once. As soon as you see a pop up, close it, and try the re-flash process once more. It should work this time. We recommend this option because it is less complex than installing drivers and running the risk of not having the correct drivers for your RP2. After you flash, you can safely delete android studio, as you will no longer need it.

Lets get started:

# Download this [https://mega.nz/folder/hQlBUCyQ#3O36oLCAZPbAGzSS6WKcEw/folder/ZRligRwS zip file] containing everything you will need. When you first come to the mega.nz page you should see a button on the top right that says “Download as Zip”. If your initial emulators were somehow corrupted, you made changes that you can’t revert or deleted software you can’t get back, re-flashing may be necessary. Before anything else you’ll want to backup all saves and save states from emulators you have used.
# After the download completes, extract the zip.
# Open the newly extracted folder and navigate to the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory and open flash_tool.exe. Note: If you have any anti-virus software, now would be a good time to disable it for a bit.
# When the flash tool first opens, it looks pretty daunting but don’t worry, it’s pretty easy to setup. At this point it’s important to make sure that your Retroid Pocket 2 is OFF and NOT CONNECTED to your computer.
# You should see “Download Agent” as the top editable box with the word “choose on the right side. Click “choose” and navigate to the MTK_AllInOne_DA.bin file located in the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory.
# Below that you’ll see an editable field called “Scatter-loading File”, once again, click “Choose” to the right of this. For this file, navigate back to the root of the folder you extracted, go to the Images directory and select MT6580_Format_All_scatter.txt.
# At this point, many green and white rows should have appeared with their boxes checked on the left side. Uncheck every box EXCEPT FOR userdata and system. (ignore the directory paths in the photo for the checked rows).
# If everything looks right, click download on the top left. This will put your computer in stand-by mode, waiting for a device to be connected. Once again, make sure your Retroid Pocket 2 is off and your saves are backed up! Now plug it into your computer and you should see a progress bar at the bottom start moving. If you don't see this bar happen don't panic. You're RPV2 will show a battery drained symbol then the amount of battery you actually have, you'll hear an audible click then wait a few seconds (5 max) unplug and power on the device. You can choose to find and download Android USB Drivers either individually by OEM or if you can find a pack. The safest bet is to [https://developer.android.com/studio download] Android Studio directly. This is a big download so be patient. once it's downloaded install it, run it once and as soon as something pops up you can go ahead and close it, the drivers will already be installed (it will prompt you to install more things after you finish the first install wizard, no need to do that just close the program).
# Once this is finished the screen will display an image letting you know.
# At this point, it’s safe to unplug your Retroid Pocket 2 and power it on. The first boot will take a while and when it boots into the OS, you’ll have to wait for it to install all of the emulator APKs. Also, the main screens resolution may be distorted, wait a minute and it will auto correct. Once everything has finished installing, restart the system once and you’ll be good to go. Enjoy!

=== Android 8.1 Status ===

This wiki will shortly receive an overhaul to be 8.1 focused. For more information about what to expect from the update, see [[Android_8.1_on_the_RP2#What_to_Expect|here]].

----------------------------------------------
Credit to Jecklen, Taki, Kaoshade92, Dsachs420, uncletrunks, /silverdusk/ and TotallyTerry.

Firmware

2020-12-07T15:15:25Z

172.58.207.166: /* Re-flashing Your RP2 with Android 6.0 */

__TOC__

=Retroid Official Over-the-Air (OTA) Method=

=== Update Repair App ===

In order to use the Retroid Upgrade app, you are required to have a working version of RetroidOS on an externally formatted SD card.
If you need to repair RetroidOS or reinstall it (if you're moving from internally formatted, or just deleted it) follow the procedure linked below.

While this will restore RetroidOS functionality for those that don't have it, the steps are still useful even for users who have RetroidOS intact as it will install the necessary Update.APK which is Retroid's OTA app.

[https://cdn.discordapp.com/attachments/753684190603509871/774740929763606549/Upgrade_Repair_apk_Installation_method.docx Click here for the procedure.] 
 
Please note Retroid does NOT update via Google's OTA facility.
 
 
Once the above is finished, you can run the Updater tool to immediately update to the newest version of Android currently available for the device.

Link to the Upgrade Repair APK file is available at https://bit.ly/2GEqyGz
 

=Manual Flashing Method=

== Android 8.1 ==

Below are the 8.1 Image Files. Follow this [https://youtu.be/6aXKeEpOu9Y video guide] for updating or follow the included instructions in the zip file.

 
8.1 OS Image (V3 Final):
https://drive.google.com/file/d/1-BGTmqqTOXrr5kxBKslpScLhmxbfPnvm/view?usp=drivesdk

 
8.1 SD Card image (V3 Final): https://drive.google.com/file/d/1NcGMacWnCxmpDq0vLbct6s_JvhzJl6sP/view?usp=sharing

 
Mega Mirror copy of the GDrive folder with instructions on flashing 6.0 and 8.1: https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA (Use if Gdrive links aren't working for you).

== RetroidOS ==

=== Downloading the RetroidOS Files ===

Here is a [https://drive.google.com/file/d/1Li1LR9Lc9-cMIFtM7UXWPB8oDDTPqtAi/view stock SD Card image (2.6GB ZIP)] for use with the RP2, in case your original card is damaged, formatted, or erased. This will restore your ability to use RetroidOS and the Retroid store, but no games are included.
 
 
 

== Advanced Actions ==

=== Downloading the Android Files ===

If you uninstalled any preinstalled apps and would like to reinstall the stock versions, here is [https://drive.google.com/drive/folders/14osfAwZURQEayHUyrSA5j7TdEV1dmxyP?usp=sharing a folder with all the APKs.]

A backup of the stock internal storage files (6.5MB) can be found [https://drive.google.com/file/d/1Viw4qTmEGxllbTkbz6NR5uUbA4Ge1yTk/view?usp=sharing here.] This is useful if you mess up the configs that come with the device.

[https://drive.google.com/drive/folders/1MAwGsJ-uz6jkxVPCvuMY9QUhMzJu2Cp0?usp=sharing Here] is a Google Drive folder with all the files contained on this wiki page. You can add it to your Google Drive and find it in the "Shared with me" section for easy future access.

=== Root Access (Android 6 Only) ===

[https://cdn.discordapp.com/attachments/753684190603509871/755114189999177808/rp2-root.zip Download this ZIP archive] and root your RP2 at your own risk. There is a guide available inside the zip called 'Installation.txt'.

You will also need ADB Drivers for windows. You can easily achieve this by using this program:

[https://drive.google.com/file/d/0B0MKgCbUM0itSUhpUklCTFpzWkE/view Download ADB Drivers]

=== Re-flashing Your RP2 with Android 6.0 ===

Here is our mega [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA download] for Android 6, re-flash guide and files within. This will NOT restore your RetroidOS files (see above).

Tip: If you are having any issues with connecting your device to your PC or if you are trying to re-flash the device, make sure to install the [https://www.ytechb.com/mt65xx-preloader-driver/ MT Drivers]. It will include the drivers for USB support. If you have previous drivers please make sure to uninstall them.

Notes before we get started: Here is the [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA source folder] with all the files you'll need to re-flash your Retroid.

Tip: If for whatever reason you have changed default usb drivers on your PC, you will reach a point in this process where you hit download and connect your device, but nothing happens. The fix is to download [https://www.ytechb.com/mt65xx-preloader-driver/ MR Drivers] and install it, then run it once. As soon as you see a pop up, close it, and try the re-flash process once more. It should work this time. We recommend this option because it is less complex than installing drivers and running the risk of not having the correct drivers for your RP2. After you flash, you can safely delete android studio, as you will no longer need it.

Lets get started:

# Download this [https://mega.nz/folder/hQlBUCyQ#3O36oLCAZPbAGzSS6WKcEw/folder/ZRligRwS zip file] containing everything you will need. When you first come to the mega.nz page you should see a button on the top right that says “Download as Zip”. If your initial emulators were somehow corrupted, you made changes that you can’t revert or deleted software you can’t get back, re-flashing may be necessary. Before anything else you’ll want to backup all saves and save states from emulators you have used.
# After the download completes, extract the zip.
# Open the newly extracted folder and navigate to the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory and open flash_tool.exe. Note: If you have any anti-virus software, now would be a good time to disable it for a bit.
# When the flash tool first opens, it looks pretty daunting but don’t worry, it’s pretty easy to setup. At this point it’s important to make sure that your Retroid Pocket 2 is OFF and NOT CONNECTED to your computer.
# You should see “Download Agent” as the top editable box with the word “choose on the right side. Click “choose” and navigate to the MTK_AllInOne_DA.bin file located in the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory.
# Below that you’ll see an editable field called “Scatter-loading File”, once again, click “Choose” to the right of this. For this file, navigate back to the root of the folder you extracted, go to the Images directory and select MT6580_Format_All_scatter.txt.
# At this point, many green and white rows should have appeared with their boxes checked on the left side. Uncheck every box EXCEPT FOR userdata and system. (ignore the directory paths in the photo for the checked rows).
# If everything looks right, click download on the top left. This will put your computer in stand-by mode, waiting for a device to be connected. Once again, make sure your Retroid Pocket 2 is off and your saves are backed up! Now plug it into your computer and you should see a progress bar at the bottom start moving. If you don't see this bar happen don't panic. You're RPV2 will show a battery drained symbol then the amount of battery you actually have, you'll hear an audible click then wait a few seconds (5 max) unplug and power on the device. You can choose to find and download Android USB Drivers either individually by OEM or if you can find a pack. The safest bet is to [https://developer.android.com/studio download] Android Studio directly. This is a big download so be patient. once it's downloaded install it, run it once and as soon as something pops up you can go ahead and close it, the drivers will already be installed (it will prompt you to install more things after you finish the first install wizard, no need to do that just close the program).
# Once this is finished the screen will display an image letting you know.
# At this point, it’s safe to unplug your Retroid Pocket 2 and power it on. The first boot will take a while and when it boots into the OS, you’ll have to wait for it to install all of the emulator APKs. Also, the main screens resolution may be distorted, wait a minute and it will auto correct. Once everything has finished installing, restart the system once and you’ll be good to go. Enjoy!

Remember to uninstall Android studio from your computer if you no longer have a need for it.

=== Android 8.1 Status ===

This wiki will shortly receive an overhaul to be 8.1 focused. For more information about what to expect from the update, see [[Android_8.1_on_the_RP2#What_to_Expect|here]].

----------------------------------------------
Credit to Jecklen, Taki, Kaoshade92, Dsachs420, uncletrunks, /silverdusk/ and TotallyTerry.

Firmware

2020-12-07T15:14:39Z

172.58.207.166: /* Re-flashing Your RP2 with Android 6.0 */

__TOC__

=Retroid Official Over-the-Air (OTA) Method=

=== Update Repair App ===

In order to use the Retroid Upgrade app, you are required to have a working version of RetroidOS on an externally formatted SD card.
If you need to repair RetroidOS or reinstall it (if you're moving from internally formatted, or just deleted it) follow the procedure linked below.

While this will restore RetroidOS functionality for those that don't have it, the steps are still useful even for users who have RetroidOS intact as it will install the necessary Update.APK which is Retroid's OTA app.

[https://cdn.discordapp.com/attachments/753684190603509871/774740929763606549/Upgrade_Repair_apk_Installation_method.docx Click here for the procedure.] 
 
Please note Retroid does NOT update via Google's OTA facility.
 
 
Once the above is finished, you can run the Updater tool to immediately update to the newest version of Android currently available for the device.

Link to the Upgrade Repair APK file is available at https://bit.ly/2GEqyGz
 

=Manual Flashing Method=

== Android 8.1 ==

Below are the 8.1 Image Files. Follow this [https://youtu.be/6aXKeEpOu9Y video guide] for updating or follow the included instructions in the zip file.

 
8.1 OS Image (V3 Final):
https://drive.google.com/file/d/1-BGTmqqTOXrr5kxBKslpScLhmxbfPnvm/view?usp=drivesdk

 
8.1 SD Card image (V3 Final): https://drive.google.com/file/d/1NcGMacWnCxmpDq0vLbct6s_JvhzJl6sP/view?usp=sharing

 
Mega Mirror copy of the GDrive folder with instructions on flashing 6.0 and 8.1: https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA (Use if Gdrive links aren't working for you).

== RetroidOS ==

=== Downloading the RetroidOS Files ===

Here is a [https://drive.google.com/file/d/1Li1LR9Lc9-cMIFtM7UXWPB8oDDTPqtAi/view stock SD Card image (2.6GB ZIP)] for use with the RP2, in case your original card is damaged, formatted, or erased. This will restore your ability to use RetroidOS and the Retroid store, but no games are included.
 
 
 

== Advanced Actions ==

=== Downloading the Android Files ===

If you uninstalled any preinstalled apps and would like to reinstall the stock versions, here is [https://drive.google.com/drive/folders/14osfAwZURQEayHUyrSA5j7TdEV1dmxyP?usp=sharing a folder with all the APKs.]

A backup of the stock internal storage files (6.5MB) can be found [https://drive.google.com/file/d/1Viw4qTmEGxllbTkbz6NR5uUbA4Ge1yTk/view?usp=sharing here.] This is useful if you mess up the configs that come with the device.

[https://drive.google.com/drive/folders/1MAwGsJ-uz6jkxVPCvuMY9QUhMzJu2Cp0?usp=sharing Here] is a Google Drive folder with all the files contained on this wiki page. You can add it to your Google Drive and find it in the "Shared with me" section for easy future access.

=== Root Access (Android 6 Only) ===

[https://cdn.discordapp.com/attachments/753684190603509871/755114189999177808/rp2-root.zip Download this ZIP archive] and root your RP2 at your own risk. There is a guide available inside the zip called 'Installation.txt'.

You will also need ADB Drivers for windows. You can easily achieve this by using this program:

[https://drive.google.com/file/d/0B0MKgCbUM0itSUhpUklCTFpzWkE/view Download ADB Drivers]

=== Re-flashing Your RP2 with Android 6.0 ===

Here is our mega [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA download] for Android 6, re-flash guide and files within. This will NOT restore your RetroidOS files (see above).

Tip: If you are having any issues with connecting your device to your PC or if you are trying to re-flash the device, make sure to install the [https://www.ytechb.com/mt65xx-preloader-driver/ MT Drivers]. It will include the drivers for USB support. If you have previous drivers please make sure to uninstall them. If you do not want the entire suite, you can install just the USB drivers. Make sure to read the instructions, and [https://developer.android.com/studio/run/win-usb download here].

Notes before we get started: Here is the [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA source folder] with all the files you'll need to re-flash your Retroid.

Tip: If for whatever reason you have changed default usb drivers on your PC, you will reach a point in this process where you hit download and connect your device, but nothing happens. The fix is to download [https://www.ytechb.com/mt65xx-preloader-driver/ MR Drivers] and install it, then run it once. As soon as you see a pop up, close it, and try the re-flash process once more. It should work this time. We recommend this option because it is less complex than installing drivers and running the risk of not having the correct drivers for your RP2. After you flash, you can safely delete android studio, as you will no longer need it.

Lets get started:

# Download this [https://mega.nz/folder/hQlBUCyQ#3O36oLCAZPbAGzSS6WKcEw/folder/ZRligRwS zip file] containing everything you will need. When you first come to the mega.nz page you should see a button on the top right that says “Download as Zip”. If your initial emulators were somehow corrupted, you made changes that you can’t revert or deleted software you can’t get back, re-flashing may be necessary. Before anything else you’ll want to backup all saves and save states from emulators you have used.
# After the download completes, extract the zip.
# Open the newly extracted folder and navigate to the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory and open flash_tool.exe. Note: If you have any anti-virus software, now would be a good time to disable it for a bit.
# When the flash tool first opens, it looks pretty daunting but don’t worry, it’s pretty easy to setup. At this point it’s important to make sure that your Retroid Pocket 2 is OFF and NOT CONNECTED to your computer.
# You should see “Download Agent” as the top editable box with the word “choose on the right side. Click “choose” and navigate to the MTK_AllInOne_DA.bin file located in the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory.
# Below that you’ll see an editable field called “Scatter-loading File”, once again, click “Choose” to the right of this. For this file, navigate back to the root of the folder you extracted, go to the Images directory and select MT6580_Format_All_scatter.txt.
# At this point, many green and white rows should have appeared with their boxes checked on the left side. Uncheck every box EXCEPT FOR userdata and system. (ignore the directory paths in the photo for the checked rows).
# If everything looks right, click download on the top left. This will put your computer in stand-by mode, waiting for a device to be connected. Once again, make sure your Retroid Pocket 2 is off and your saves are backed up! Now plug it into your computer and you should see a progress bar at the bottom start moving. If you don't see this bar happen don't panic. You're RPV2 will show a battery drained symbol then the amount of battery you actually have, you'll hear an audible click then wait a few seconds (5 max) unplug and power on the device. You can choose to find and download Android USB Drivers either individually by OEM or if you can find a pack. The safest bet is to [https://developer.android.com/studio download] Android Studio directly. This is a big download so be patient. once it's downloaded install it, run it once and as soon as something pops up you can go ahead and close it, the drivers will already be installed (it will prompt you to install more things after you finish the first install wizard, no need to do that just close the program).
# Once this is finished the screen will display an image letting you know.
# At this point, it’s safe to unplug your Retroid Pocket 2 and power it on. The first boot will take a while and when it boots into the OS, you’ll have to wait for it to install all of the emulator APKs. Also, the main screens resolution may be distorted, wait a minute and it will auto correct. Once everything has finished installing, restart the system once and you’ll be good to go. Enjoy!

Remember to uninstall Android studio from your computer if you no longer have a need for it.

=== Android 8.1 Status ===

This wiki will shortly receive an overhaul to be 8.1 focused. For more information about what to expect from the update, see [[Android_8.1_on_the_RP2#What_to_Expect|here]].

----------------------------------------------
Credit to Jecklen, Taki, Kaoshade92, Dsachs420, uncletrunks, /silverdusk/ and TotallyTerry.

Nintendo 64

2020-11-16T04:24:57Z

172.58.63.123:

Nintendo 64 compatibility list and best Mupen settings, please note many of these are for PAL roms, updated settings for USA roms forthcoming.

{| class="wikitable"
|+ N64 Gamelist
|-
! Game Name !! Region !! Emulator !! Settings !! Notes
|-
| 1080 Snowboarding || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Aidyn Chronicles || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Army Men Air Combat || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Army Men Sarge's Heroes 2 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Banjo Kazooie || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Banjo Kazooie || NTSC || Mupen64 Plus FZ || Gln64-fast || Set Frameskip to "Never skip frames", enable "Fog", Disable "Force screen clear" and enable "Hack depth coordinates"
|-
| Banjo Tooie || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Batman Beyond || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Biohazard || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Bomberman 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Bomberman 64 2 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Bomberman Hero || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Bug's Life || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Castlevania || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Castlevania LOD || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Chameleon Twist || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Chameleon Twist 2 || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Conker's Bad Fur Day || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Cruis'n USA || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Diddy Kong Racing || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Disney's Tarzan || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Donkey Kong || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Doom 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Duke Nukem Zero Hour || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Earthworm Jim 3D || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Excitebike 64 || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| F-Zero || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| F-Zero X || NTSC || Mupen64 Plus FZ || Rice Accurate || Set 'Fog', 'Fast texture loading', and 'Texture filtering' to On. Set 'Texture upscaling/enhancement' to 'Scale 2x'
|-
| Forsaken 64 || NTSC || Mupen64 Plus FZ || GlideN64-Fast || Runs perfectly with this profile.
|-
| Glover || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Goemon's Great Adventure || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| GoldenEye 007 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| GoldenEye 007 || NTSC || Mupen64 Plus FZ || GlideN64 fast || Set "Copy depth buffer to RDRAM" to "Do not copy" will allow the FPS to increase to 40fps (game runs between 18-30fps on Official hardware)
|-
| Harvest Moon 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Indiana Jones & tIM || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Jet Force Gemini || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Killer Instinct Gold || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Kirby 64 - Crystal Shards || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Legend of Zelda: Majora's Mask || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Legend of Zelda: Majora's Mask || NTSC || Mupen64 Plus FZ || Gln64-Accurate || Leave 'Fog' disabled (it works but flashes in and out), and set '2xSal texture filter' to on.
|-
| Legend of Zelda: Ocarina of Time || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Legend of Zelda: Ocarina of Time || NTSC || Mupen64 Plus FZ || Gln64-Accurate || x
|-
| Mario Kart || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Mario Tennis || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Mega Man 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Mischief Makers || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Mortal Kombat 4 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Ogre Battle 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Paper Mario || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Paper Mario || NTSC || Mupen64 Plus FZ || GlideN64 fast || Enable frame buffer
|-
| Perfect Dark || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Pokemon Snap || PAL || Mupen64 Plus FZ || GlideN64 fast || Enable camera cheat + picture code. Requires Copy Fram Buffer to RDRAM
|-
| Pokemon Stadium || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Pokemon Stadium 2 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Quest 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Rayman 2: The Great Escape || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Ridge Racer 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Rocket - Robot on Wheels || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Rugrats - Scavenger Hunt || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Rugrats in Paris || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Shadowgate 64 - Trials || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Shin Nihon Pro Wrestling || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Snowboard Kids || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Snowboard Kids || NTSC || Mupen64 Plus FZ || GlideN64 fast || Set "Copy depth buffer to RDRAM" to "Do not copy" for stable 30fps
|-
| South Park || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| StarCraft 64 || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Star Fox 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Star Soldier || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Star Wars Rogue Squadron || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Star Wars SoTE || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Star Wars Episode 1 BoN || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Star Wars Episode 1 Racer || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Super Mario 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Super Mario 64 || NTSC || Mupen64 Plus FZ || Rice no fs || 640x480 res with de- synced audio
|-
| Super Robot Taisen 64 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Super Smash Bros || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Taz Express || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| TG Rally 2 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Tonic Trouble || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Tony Hawk's Pro Skater 3 || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Toy Story 2 - Buzz || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Turok Dinosaur Hunter || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Turok Rage Wars || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Turok 2 - Seeds of Evil || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Turok 3 - SoO || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Wave Race 64 || PAL || Mupen64 Plus FZ || Rice no fs || x
|-
| Worms - Armageddon || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Yoshi's Story || PAL || Mupen64 Plus FZ || GlideN64 fast || x
|-
| Yoshi's Story || NTSC || Mupen64 Plus FZ || Rice-Accurate || Set "Fog" to on, set "Fast texture loading" to off, set "Texture filtering" to on. Set "Screen update method" to 'VI origin change', and set "High resolution textures" to off.
|}

---------------------------------------------------------
Thank you to Taki Udon and the community settings spreadsheet.